24/7
Live dispatch, day or night
No fix, no fee
You pay nothing if we cannot do it
9 areas
From Vancouver and the North Shore to Langley
1 yr
Warranty on parts & labour
AUTOMOTIVE RATES — VERIFIED SEPTEMBER 2026
What a Car Key Costs in Vancouver
My Locksmith Near Me cuts and programs a transponder key for $180 to $260 in Vancouver, a proximity smart fob for $300 to $420, and a full replacement when every key is lost for $280 to $520. It all happens at your car, so there is no tow and no dealer appointment three days away. The $69 service call covers coming out and diagnosing the problem, and it comes off the bill as soon as you approve the work. If we cannot do the job, you are not charged at all.
CHIPPED KEYS
Transponder Key
$180 – $260 On-site time: 30–45 mins
- Blade cut to your lock and the chip programmed on site
- Immobiliser paired through the OBD-II port at the vehicle
- Most Honda, Toyota, Ford, GM, Hyundai and Nissan covered
Most Common
PUSH-BUTTON START
Proximity Smart Fob
$300 – $420 On-site time: 30–45 mins
- Keyless-entry and push-to-start fobs programmed at the vehicle
- Rolling codes paired so a lost fob is locked out for good
- Emergency blade cut for the door in case the battery dies
NO WORKING KEY
All Keys Lost, Key by VIN
$280 – $520 On-site time: 45–75 mins
- Key originated from the VIN with no existing key to copy
- Immobiliser memory reset so every lost key stops working
- Photo ID and proof of ownership required before we start
EUROPEAN & LUXURY
BMW, Audi, Mercedes & Volvo
$400 – $900 On-site time: 45–90 mins
- Encrypted European systems on 2008 and newer vehicles
- Dealer-level tooling without the dealer-level wait
- Quoted by VIN before we come out, never guessed at the kerb
WHILE YOU HAVE ONE
Spare Key Added
$150 – $260 On-site time: 20–40 mins
- Much cheaper than waiting until the only key is lost
- No immobiliser reset needed while a working key still exists
- Cut and paired in your driveway or the office car park
Dealership versus My Locksmith Near Me: a dealer charges $300 to $700 plus a tow and books you in one to three days out. We come to the vehicle and finish it the same day.
| Automotive service | My Locksmith Near Me price | Typical time at the vehicle |
|---|---|---|
| Transponder key, cut and programmed | $180 – $260 | 30 – 45 minutes |
| Proximity or smart fob, cut and programmed | $300 – $420 | 30 – 45 minutes |
| All keys lost, key originated by VIN | $280 – $520 | 45 – 75 minutes |
| European and luxury vehicles, 2008 and newer | $400 – $900 | 45 – 90 minutes |
| Spare key added while a working key exists | $150 – $260 | 20 – 40 minutes |
| Dealership equivalent, for comparison | $300 – $700 plus a tow | 1 – 3 day appointment |
Three things move an automotive price inside its range: the make and model year, whether the key is a chipped blade or a proximity fob, and whether any working key still exists. All three come off the VIN, which is why we ask for it on the phone and can quote a firm total before coming out. The one that costs the most is the last one, so if you are down to a single key it is worth adding a spare now.
Other work is priced on its own page: 24/7 emergency lockouts, home rekeying and lock changes, and commercial and strata systems.

Car Key Replacement Vancouver
What an Automotive Locksmith Does
An automotive locksmith cuts and programs car keys and fobs at the car instead of at a dealership. My Locksmith Near Me does this across Vancouver, Burnaby and Metro Vancouver for $180 to $260 on a transponder key and $300 to $420 on a proximity fob, working from a van with the cutting and programming equipment on board.
The reason this matters is the tow. A dealership needs the car on its forecourt, so with no working key you are paying for recovery on top of a key, and waiting one to three days for an appointment. A mobile locksmith comes to the car wherever it is parked and finishes it the same day.
When every key is lost, a new one is made from the VIN. Manufacturers release that security data only through vetted channels such as NASTF, and we tell you on the call exactly what your vehicle needs before we come out.
When Drivers Call Us
When You Need a Car Key Replaced
My Locksmith Near Me is called out across Metro Vancouver most often for keys that are lost rather than broken, fobs that stopped talking to the car, a blade snapped in a door or ignition, and drivers down to their last working key who decided not to risk it.
- The only key is lost, and there is no spare anywhere
- A fob has stopped unlocking or the car no longer detects it
- A key has snapped in the door lock or in the ignition
- You are down to one key and want a spare before that changes
- You bought a used car and it came with a single key
- The dealership quoted a price plus a tow and a three-day wait
Only the first of these is genuinely urgent. The rest are cheaper and easier booked in advance, and a spare cut while you still have a working key costs roughly half what the same key costs after the last one is gone.


How a Key Is Made
How We Cut and Programme a Key With No Original
When every key is lost there is nothing to copy, so the key has to be originated from the vehicle itself. My Locksmith Near Me does this by VIN for $280 to $520, cutting a blade to the factory key code and then writing the new key into the immobiliser so the car will accept it. The same process wipes the lost keys out of the car memory, which is the part that actually protects you.
- Confirm ownership. Photo ID plus registration or the insurance slip, before any tooling comes out.
- Read the VIN and pull the key code, or decode the lock directly at the vehicle.
- Cut the blade on the van, to the factory code rather than by tracing a worn original.
- Programme the transponder or fob through the OBD-II port and pair it to the immobiliser.
- Erase the lost keys from the immobiliser memory, then test every door, the boot and the ignition.
Proof of ownership is not a formality here. Originating a key by VIN produces a working key to a vehicle from nothing, so photo ID plus registration or an insurance slip is required before anything starts, on every job, with no exceptions.
Vancouver, Burnaby & Metro Vancouver
Car Key Replacement Across Metro Vancouver
My Locksmith Near Me comes to the car wherever it is parked: driveways, condo parkades, downtown lots, Metrotown and Richmond Centre parking, the YVR and Tsawwassen ferry lots, and the side of the road. The car does not move, which is the whole point of a mobile automotive locksmith.
Strata parkades are the one place to call ahead. Most towers in Downtown, Yaletown, Metrotown and Brentwood will not let a technician through the gate without a resident, so arrange access before we arrive, not while we wait at the ramp.
Underground parkades also block the signal our tooling uses to reach manufacturer systems on some newer vehicles. Where that happens we move the car to the ramp or the street, which is a two-minute problem if you know about it in advance and an aborted visit if you do not.
Bring the vehicle documents to the car rather than leaving them at home. Ownership is checked at the vehicle, before any key is cut, and a photo of the registration on your phone is enough if the paper copy is in a glovebox you cannot open.


Licensed & Insured in British Columbia
Licensing, NASTF and Why They Matter for Your Car
Locksmiths in British Columbia must hold a security worker licence under the Security Services Act, issued by the Security Programs Division. The licence requires a Locksmith Certificate of Qualification or documented supervised experience, plus fingerprinting and a criminal record check. My Locksmith Near Me technicians are BC-licensed and carry the card on every vehicle call.
Car keys have a second layer of security. NASTF, the National Automotive Service Task Force, is the system manufacturers use to release secure vehicle data only to identity-checked locksmiths who are accountable for every request. Anyone making a key from a VIN should be working inside that system, and it is fair to ask.
My Locksmith Near Me also carries liability insurance and WorkSafeBC coverage, which matters on modern vehicles where a door card has to come off or an airbag circuit runs through the pillar being worked on.
Check any BC security worker licence on the provincial verification tool
Before We Cut a Key
What We Need From You
My Locksmith Near Me asks for photo ID plus the vehicle registration or insurance before cutting a key for any car in Metro Vancouver. The name has to match the vehicle. It is the one check that stops a stranger getting a working key to your car, so it applies to everyone, every time.
Have the VIN ready when you call. It is on the insurance papers, on a plate at the base of the windscreen on the driver side, and inside the driver door jamb. The VIN tells us the exact key type, the tooling required and the price, which is how you get a firm number on the phone instead of a range at the kerb.
Tell us on the call whether any working key still exists, even a damaged one. It changes the job from originating a key to adding one, and it usually roughly halves the price.

MOBILE KEY SERVICE
How a Car Key Job Actually Runs
Quoted from your VIN, done at your vehicle, finished the same day. Four steps and no tow.
Call With the VIN
Read us the VIN off the insurance papers or the windscreen plate. It tells us the key type, the tooling and the price.
Firm Quote by Vehicle
You get an exact total for your make, model and year before we come out, not a range that moves at the kerb.
We Come to the Car
A BC-licensed technician arrives at the car with the cutting and programming equipment on board.
Cut, Paired and Tested
The key is cut, programmed and tested in every door and the ignition, with lost keys erased from the immobiliser.
Transponder keys from $180 • No tow to the dealership • Firm quote from your VIN
DRIVER QUESTIONS
Frequently Asked Questions
Clear answers on keys, fobs, programming and what it costs.